Brass Connectors not Meant for Plumbing!

Manufacturers and Exporters of
Electrical Wiring Accessories
Everyday at morning when someone turns on the switch somewhere in the world, the small parts that are configured behind the switch panel comes alive – and it’s a good start for the day.
Manufacturers and Exporters of
Specification Components
We are the facilitator for a diverse range of products that play a very significant role into some of the bigger scheme of things.
Manufacturers and Exporters of
FASTENERS
Whether in a giant industrial set-up or for a small household, to hold things in place the fasteners play a pivotal role that ensure stability, strength and peace of mind.

Brass Connectors Not Meant for Plumbing!

This may sound weird but it is true that brass connectors India suppliers suggest plumbing world to use lead free brass connectors and fittings only. The use of brass remains a controversial part and people are still using it by ignoring the negative sides. But do you know? Using brass for plumbing purposes can be poisonous and can cause cancer and long term health problems.

Stainless steel pipes and copper pipes are better in cost and usage as compared to brass since they cut down all worries about the lead levels exposure. There are reasons why some people are always against using brass for plumbing purposes-

1. There are alternatives available always
2. You just cannot employ brass because it is slightly cheaper than other options.
3. There is no way to determine how safe or unsafe brass fittings are.
4. Most brass fittings are unsuitable and unsafe for potable water piping and this makes drinking water less safe for distilling use.

The distributor is a critical part of the ignition system that takes higher voltage and delivers it to ignite the spark plugs.

You should remember during replacement of the distributor rotor and cap that the entire ignition system needs to be inspected. Once replacement is done, the ignition wires will need to be reinstalled.

How to know if you need to replace the distributor rotor and cap?

There are four signs that tell the default in the distributor rotor and cap. These are as under-

1. Engine misfires
2. Noises from the engine
3. Car doesn’t start
4. Check engine light is on

Different Sources of Lead in Drinking Water

The lead amount attributable to corrosion by-products in the water relies on numerous factors, such as amount and age of lead bearing material result in corrosion, the way of construction, how long they are in contact with water and how corrosive the water is for these materials. The acidity, alkalinity, hardness, and dissolved solids influence the corrosiveness of water.

Is it possible that plumbing fixtures or devices can contain 8% or less lead and is this amount enough to contaminate drinking water?

Yes, any plumbing device fixture that has any amount of lead and is exposed to water can contaminate your drinking water supply.

Lead free brass is not free of lead. It can contain up to 8% of lead.

In the study, some experts have found that brass can contain up to 18% to 20% lead. You should know that lead can have a major impact on your yeast and flavoring.

All brass have lead; however the amount of lead in certain fittings is least. You cannot say that all brass fittings are considered safe for use in plumbing. As there is no way to determine how much lead is used in the fitting, the lead levels are insanely high in many cases.

So, if you want brass connectors for other DIY project, you can get in touch with brass connectors India manufacturers in your local. Make sure you don’t apply these connectors to plumbing fittings because they may contain lead.

Inquiry Now